.
Martec Phoenix 3-in-1 Fan, Heater, Light & Exhaust White
Model # MBHP1000W
Model #
MBHP1000W
$324.50 $295.00 ex GST
17% OFF
RRP $389.00
Click here to see our huge rangeMounting Base Covers
Sort by
Product Filters
Industrial Switchgear Covers, Clipsal Switch Covers, & Mounting Bases
Protect critical circuits and outlets in harsh environments with industrial switchgear covers designed for reliability, safety, and quick installation. MJS Electrical Supplies stocks a wide range of industrial switchgear covers, Clipsal switch covers, Clipsal mounting base options, and industrial socket covers to suit demanding industrial sites, commercial plant rooms, and outdoor installations.
Whether you are upgrading existing equipment or building new control points, you can pair these covers with Clipsal 56 Series products or other industrial electrical supplies for a complete, compliant solution.
Choosing the Right Industrial Switchgear Cover
Industrial installations get exposed to dust, water, chemicals, and impact, so having the right cover is essential for protecting the switchgear and maintaining compliance. Our industrial switchgear covers are reliable in:
- Food and beverage plants (and wash-down areas)
- Workshops, warehouses, and factories
- Mining, utilities, and heavy industrial sites
- Outdoor control points and exposed car parks
Weatherproof Performance & IP66 Rating
Many covers in this category can achieve an IP66 (weatherproof/industrial rating) when installed as specified by the manufacturer, using the correct high-pressure water gasket. This setup helps protect switches and sockets against dust ingress and high-pressure water exposure, such as hose-downs or rain. Still, complete system compliance also requires correct wiring and installation methods.
Look for:
- Deep lids and tough seals to maintain IP performance
- UV-stabilised materials suitable for the harsh Australian sun
- Positive locking mechanisms to prevent accidental opening
Impact & Chemical Resistance
Industrial environments are harsh on enclosures. Selected industrial socket covers and switch covers are chemical-resistant, helping them withstand exposure to cleaning agents, oils, and industrial solvents.
Key features may include:
- Impact-resistant housings to reduce damage in high-traffic areas
- Corrosion-resistant fixings and hardware
- Robust hinges and latches designed for frequent operation
Colour Options & Chemical Resistance
Different colour options indicate differences in chemical or environmental resistance. Common choices include:
- Grey (standard industrial colour) is for general industrial uses and resists neutral chemicals.
- Resistant Orange (RO) and Resistant White Electric (RW) resist acid-based detergents and chemicals.
- Chemical Resistant Grey and Chemical Resistant Dark Grey resist alkaline-based chemicals and foaming caustic.
- WilcoROWCO Metal Clad Cast Aluminium (yellow) can withstand high impact and resist heavy-duty chemicals.
These colour options make it easier for tradies and maintenance teams to visually distinguish between different circuits, voltages, environmental resistance, or functions at a glance.
Clipsal Switch Covers & Industrial Socket Covers
MJS Electrical Supplies offers Clipsal switch covers and industrial socket covers to suit popular industrial ranges, including the Clipsal 56 Series. These covers are durable, easy to install, and designed to perform reliably over time.
Clipsal 56 Series: Compatible Covers
For projects based around the Clipsal 56 platform, you’ll find:
- Replacement Clipsal switch covers for standard switch configurations
- Industrial socket covers to suit single and multi-pole outlets
- Matching gaskets and accessories to maintain IP ratings
Choosing the correct cover ensures a tight seal to the base, supporting the overall IP66 weatherproof performance of the assembly.
Clipsal Mounting Bases & DIN-Rail-Compatible Options
A reliable Clipsal mounting base is essential for securely fixing switchgear and accessories. In this category, you’ll find:
- Surface-mounting bases for wall and structure installations
- Bases designed to match specific Clipsal 56 switch-and-socket modules
- Selected bases that are DIN-rail-compatible, simplifying the mounting of control components, contactors, and other devices inside the enclosure
When matching a Clipsal mounting base to a cover, always confirm cut-out sizes, pole configuration, and rating to ensure the assembly meets the application requirements.
Covers with Neon Indicators & Labelling
Some switchgear covers are available in cover and neon versions, providing neon indicators (e.g., “cover + neon”) on the front face to indicate power status at a glance. This design is advantageous in:
- Machinery isolation switches
- Process control points
- Outdoor or remote equipment where quick visual checks save time
Clear front plates, embossed legends, and label recesses are available on selected models to ensure the final installation is both compliant and easy for operators to understand.
Installation & Compliance Considerations
Correct installation is essential for achieving the rated performance of industrial switchgear covers and industrial socket covers.
Sealing & Gasket Compression
To maintain IP66 and protect against high-pressure water, ensure:
- The high-pressure water gasket is correctly seated and undamaged
- All fixing screws are evenly tight to compress the gasket
- Surfaces are clean and free from debris before assembly
Over‑tightening or uneven torque can distort the cover or base, potentially compromising the IP rating.
Mechanical Support & Mounting Height
A properly selected Clipsal mounting base provides mechanical support for the connected cabling and conduit. When planning an installation:
- Confirm mounting heights against local regulations and standards
- Use appropriate fixings for masonry, metalwork, or panel mounting
- Allow for clearances around the cover for safe operation and servicing
Compatibility & Load Rating
Always match the cover, base, and internal switchgear or socket device for:
- Current and voltage rating
- Pole configuration
- Switching duty and utilisation category, where applicable
Matching the cover, base, and internal switchgear or socket drive ensures the completed assembly is fit for purpose and compliant with relevant standards.
Typical Applications for Industrial Switchgear Covers
With the right combination of industrial switchgear covers, Clipsal switch covers, mounting bases, and industrial socket covers, you can build safe, robust control and power outlets across a wide range of sites, including:
- Processing plants and industrial kitchens with regular wash-downs
- Outdoor pump stations and irrigation control sites
- Workshops and warehouses
- Mining, quarry, and heavy industrial plants with control points
- Temporary and permanent construction sites
For complete solutions, pair your covers with MJS Electrical Supplies’ comprehensive range of industrial electrical supplies, including contactors, isolators, plugs, and sockets.
Frequently Asked Questions
1. Do these industrial switchgear covers comply with Australian standards?
Our industrial switchgear covers are sourced from recognised brands and are installable in systems built to Australian standards, such as AS/NZS 3000 (Wiring Rules). Always confirm each product’s datasheet and have installation carried out by a licensed electrician.
2. Can I install industrial socket covers and switch covers myself?
No — licensed electricians are the only people permitted to complete fixed electrical work in Australia. A qualified tradesperson will ensure the cover, mounting base, and associated wiring comply with AS/NZS 3000 and any local supply authority requirements.
3. Are these covers suitable for use in wet or wash‑down areas?
Many products in this category can achieve an IP66 rating when correctly installed with the specified gasket and a compatible base. Your electrician should confirm the selected cover meets the site’s environmental and regulatory requirements.
4. How do I know if a cover is rated IP66?
Each product listing and manufacturer datasheet will state the ingress protection rating. Look for IP66 or higher ratings when dust, rain, hose-down, or high-pressure water cleaning affects equipment.
5. Are the covers UV- and weather-resistant for outdoor use?
Selected industrial switchgear covers and industrial socket covers are suitable for outdoor Australian conditions when installed as part of a compliant wiring system with mechanical protection, conduit, and secure mounting, in line with AS/NZS 3000 and manufacturer instructions. Always check the product specifications for UV suitability and temperature range.
6. What materials are the covers made of, and are they chemical-resistant?
Moulded from rigid, chemical-resistant plastics designed for industrial cleaning agents and common solvents, the covers are sturdy and reliable. For harsh or specialised chemicals, confirm compatibility with the manufacturer before installation.
7. Can I mix different brands of covers and mounting bases?
For safety and compliance, it is best to use covers, mounting bases, and devices from the same series and manufacturer (for example, the Clipsal 56 Series). Mixing components can compromise IP ratings and may not meet the manufacturer’s installation instructions.
8. Are colour options like RO and RW part of any safety requirement?
Colours such as Resistant Orange (RO), Resistant White Electric (RW), and grey indicate the sort of chemicals they resist. While colour alone is not usually a regulatory requirement, many workplaces have internal standards that support safe operation and maintenance, such as performance in certain environments.
9. Do I need DIN-rail-compatible mounting bases?
You only need DIN-rail-compatible options when mounting devices such as control relays, contactors, or protection devices inside the enclosure. Your electrician can advise whether a DIN-rail-compatible Clipsal mounting base is appropriate for your design.
10. How do I select the best gasket and sealing option?
Select the gasket and sealing kit specified by the manufacturer for the matching cover and base. Doing this helps maintain the stated IP rating and ensures the assembly performs as tested under Australian conditions.
