The non‑metallic UGOH Cover Guard Kit (60 mm) is designed to provide durable mechanical protection for underground and overhead service cables, particularly for low‑voltage customer UGOH (Underground to Overhead) cable installations. Built with robust composite materials and supplied as a kit, it simplifies installation while meeting utility installation standards for non‑metallic mechanical protection.

Key Features

  • 60 mm Width Protection – Designed for service & streetlight cable runs up to approx. 35 mm diameter.
  • Non‐Metallic Construction – Made from impact‑modified polyamide with glass‑fibre reinforcement, offering corrosion resistance and insulation.
  • U‑Section Design – Covers form a “U” section profile (no side flanges) to satisfy utility specifications for pole installations.
  • Pre‑Included Saddles & Shield – Kit includes 2 large and 4 small hot‑dip galvanised saddles plus a stainless steel (SS316) whipper‑snipper protection shield.
  • UV‑Stabilised – Suitable for exposed outdoor or pole‑mounted use, resilient against UV and environmental conditions.
  • Kit Format – Supplied as a pre‑assembled kit (typically three 1.5 m lengths per kit) for straightforward installer use.

Specifications

  • Product Type: Non‑metallic UGOH cover guard kit (60 mm)
  • Capacity: Suitable for cables up to approx. 35 mm outer diameter.
  • Material: 4 mm thick impact‑modified polyamide reinforced with glass‑fibre.
  • Included Components: 3 × U‑section cover lengths (approx. 1.5 m each) + 2 large hot‑dip galvanised saddles + 4 small hot‑dip galvanised saddles + SS316 whipper‑snipper shield.
  • Installation Location: Typically from ~2500 mm above groundline to ~300 mm below for pole services.
  • Finish: Black UV‑stabilised outer surface for durability in outdoor use.
  • Compliance: Recognised under utility specs for LV UGOH cable protection. Ausgrid: 184570

Applications

  • Protection of customer LV UGOH (Underground to Overhead) service cables on power poles.
  • Covering and protecting service & street‑light cables in outdoor environments, including poles and frames.
  • Installations where non‑conductive (non‑metallic) mechanical protection is required (e.g., on poles with HV earth down leads) as per utility specifications.
  • Projects requiring modular cover guard kits to streamline installation and compliance.

For safe, utilities‑compliant protection of service cables in outdoor installations, the 60 mm UGOH Non‑Metallic Cover Guard Kit offers a ready‑to‑install solution. Durable, UV‑resistant and designed for pole‑mounted applications, it’s a reliable choice for electricians and infrastructure installers.

Q. What does “60 mm” refer to?
A. The “60mm” designation refers to the cover guard kit designed for cables up to approximately 35 mm in diameter, using a 60mm width U‑section profile. 

Q. Is this kit suitable for outdoor pole mounting?
A. Yes. It’s specifically designed for outdoor pole use, with UV‑stable material and utility approval for mechanical protection on poles.

Q. Why use a non‑metallic cover instead of metal?
A. For certain pole situations (e.g., with HV earth down leads), non‑metallic covers are required to avoid conducting earth potentials; the utility’s standard lists a non‑metallic cover for those applications.

Q. What’s included in the kit?
A. The kit includes three cover sections, two large saddles, four small saddles and a whipper‑snipper shield—but screws/bolts are not included, so check installation requirements.

All products must be installed by a licensed electrican. DIY electrical work is illegal and very dangerous.

Change of Mind
All products purchased from MJS Electrical Products & Supplies are backed by a thirty (30) day Peace of Mind Return Policy. All products returned must be in perfect unused condition, with all components, complete with original packaging. We will not allow returns on damaged or incomplete products. Proof of purchase is required. Should the product not be in original condition, please contact us before returning it as this may save you some unnecessary costs.

Damaged / Faulty Goods
If you find that the goods were damaged in transit or were faulty in some manner, please contact us within 24 hours of receiving the goods. We will organise for the return of the goods and arrange a credit towards your next purchase or send a replacement product. Customer will incur the cost of return postage and be credited the purchase price only. We recommend that you return your unwanted items using registered post or trackable courier. We can not be held responsible if returned items are lost in transit.

Warranties
Product warranties are governed by the respective manufacturers and / or suppliers warranty terms and conditions (available on request). We will not be liable to you or any third party for any loss suffered due to product failure. We will process product warranty claims through the respective manufacturers and/or suppliers. All warranties are void if the product is not installed by a licensed electrician.

PRODUCT INFO
SKU UGOH60
Model # UGOH 60
Brand MJS Electrical Products & Supplies
SHIPPING INFO
Shipping Weight 4.0000kg
Shipping Width 0.150m
Shipping Height 0.100m
Shipping Length 1.170m