The Cabac BUTM10K Allen Key Bolt with Washer Kit is a four-pack of M10 x 30mm button head bolts from Cabac's Kulak pillars and accessories range. Cabac designs these bolts for pillar box assembly. They give electricians and network contractors a neat, tamper-resistant way to fasten pillar box covers that needs a tool to undo.

Each bolt is made from 304 stainless steel and is supplied with a matching washer, so the kit is ready for a new install or for replacing missing fasteners on site. The hex socket button head takes a standard 6mm Allen key. That means no special tools are needed, unlike Cabac's D-bolt versions, which require a dedicated tube spanner or drill socket. The result is quick cover removal and refitting during installation, inspection and maintenance work.

Key Features

  • Kit of Four Bolts with Washers – Four bolts and four washers in one pack, enough to secure a pillar cover in a single purchase.
  • M10 x 30mm Bolt Size – An M10 thread and 30mm length, as specified by Cabac for pillar box assembly.
  • 304 Stainless Steel Construction – Stainless steel resists corrosion, which suits fasteners exposed to outdoor and in-ground conditions.
  • Button Head Profile – The rounded, low-profile head sits neatly on the cover and leaves few edges to grip.
  • Standard Allen Key Drive – The hex socket takes a common 6mm Allen key, so installers can use tools they already carry.
  • Deters Unauthorised Entry – Cabac designs the kit to help deter unauthorised access to pillar boxes, because the cover cannot be removed by hand.
  • Washers Included – A washer under each bolt head helps spread the clamping load across the cover.
  • Simpler Alternative to D-Bolts – Suits sites where Allen head fixings are preferred over D-bolts, which need special tools (D-SOCKET or DB-TBSS).

Specifications

  • Model: BUTM10K
  • Range: Kulak pillars and accessories
  • Thread Size: M10
  • Bolt Length: 30 mm
  • Head Type: Button head
  • Drive Type: Hex socket (6 mm Allen key)
  • Included: Bolts with washers
  • Application: Pillar box assembly

Applications

  • Fastening covers on electrical distribution pillar boxes during new installations.
  • Replacing lost, damaged or corroded cover bolts during pillar inspection and maintenance.
  • Upgrading pillar box covers that need a tool-required fixing to help deter unauthorised entry.
  • Van and site stock for electrical and network contractors who service pillars.

With four 304 stainless steel M10 x 30mm button head bolts, matching washers and a standard 6mm Allen key drive, the Cabac BUTM10K kit makes pillar box covers quick to secure and easy to service. It is a dependable choice for contractors who want stainless fasteners that need a tool to remove, without carrying a special D-bolt spanner.

Q. What tool do I need to install the Cabac BUTM10K bolts?
A.
The button head bolts have a hex socket and take a standard 6mm Allen key. No special spanner or socket is needed, so the cover can be removed and refitted with tools most installers already carry.

Q. What is the difference between the BUTM10K and Cabac's D-bolt kits?
A.
Both are 304 stainless steel M10 x 30mm bolts designed for pillar box assembly. The BUTM10K uses an Allen key button head, while D-bolt versions such as the DBI-SS-10-30K have a captive washer and need a dedicated D-bolt tool (DB-TBSS tube spanner or D-SOCKET drill socket). Choose the D-bolt kit if your pillar or network requires D-bolts.

Q. Will these bolts fit my pillar box?
A.
The kit suits pillar boxes that use M10 threaded cover fixings where a 30mm bolt length is appropriate. Before ordering, check the thread size, bolt length and fastener type specified by your pillar manufacturer or network.

Q. What is included in the pack?
A.
The pack contains four M10 x 30mm button head bolts, each supplied with a washer. It is sold as one kit, enough to secure a cover that uses four bolts.

All products must be installed by a licensed electrican. DIY electrical work is illegal and very dangerous.

Change of Mind
All products purchased from MJS Electrical Products & Supplies are backed by a thirty (30) day Peace of Mind Return Policy. All products returned must be in perfect unused condition, with all components, complete with original packaging. We will not allow returns on damaged or incomplete products. Proof of purchase is required. Should the product not be in original condition, please contact us before returning it as this may save you some unnecessary costs.

Damaged / Faulty Goods
If you find that the goods were damaged in transit or were faulty in some manner, please contact us within 24 hours of receiving the goods. We will organise for the return of the goods and arrange a credit towards your next purchase or send a replacement product. Customer will incur the cost of return postage and be credited the purchase price only. We recommend that you return your unwanted items using registered post or trackable courier. We can not be held responsible if returned items are lost in transit.

Warranties
Product warranties are governed by the respective manufacturers and / or suppliers warranty terms and conditions (available on request). We will not be liable to you or any third party for any loss suffered due to product failure. We will process product warranty claims through the respective manufacturers and/or suppliers. All warranties are void if the product is not installed by a licensed electrician.

PRODUCT INFO
SKU BUTM10K
Model # BUTM10K
Barcode # 9318674879916
Brand Cabac
SHIPPING INFO
Shipping Weight 0.1000kg
Shipping Width 0.080m
Shipping Height 0.020m
Shipping Length 0.070m