The Clipsal 56 Series 1 Pole 10A Surface Switch in White (56SW110-RW) is a weatherproof rotary surface switch rated 10A at 250V AC, with 1 switched pole. It gives positive ON and OFF switching for lights and equipment in tough locations.

The switch is rated IP66, has an M80 motor rating at 250V and a rotary knob with clear ON-OFF marking. Screw terminals take 1.5 to 6mm² cables, it measures 107 x 101 x 83mm complete with its enclosure, and it is finished in White.

Key Features

  • 1 Pole, 10A – Rated 10A at 250V AC, 50Hz.
  • Rotary Knob – Positive switching with ON-OFF marking.
  • M80 Motor Rating – Motor rating M80 at 250V.
  • IP66 Weatherproof – Protected against dust and powerful water jets.
  • Screw Terminals – Accept 1.5 to 6mm² cables.
  • Surface Mounted – Complete with enclosure, fixes by screws.
  • Fluorescent Loads – For fluorescent loads, Clipsal recommends the 56SW110HD.
  • White Finish – Clean white body.
  • 56 Series Range – Part of Clipsal's 56 Series weatherproof family.

Specifications

  • Model: 56SW110-RW
  • Range: Clipsal 56 Series
  • Type: Surface switch, 1 gang
  • Switched Poles: 1
  • Rated Current: 10A
  • Rated Voltage: 250V AC, 50Hz
  • Motor Rating: M80 at 250V
  • Suitable for Isolation: No
  • Operation: Rotary knob, ON-OFF
  • Terminals: 1.5 to 6mm²
  • IP Rating: IP66
  • Dimensions: 107mm H x 101mm W x 83mm D
  • Colour: White

Applications

  • Outdoor lighting and equipment switching
  • Washdown and wet areas
  • Sheds, garages and outbuildings

For tough, weatherproof switching, choose the Clipsal 56SW110-RW 1 pole 10A 56 Series switch.

Q. What is the rating of the Clipsal 56SW110-RW?
A.
It is rated 10A at 250V AC with 1 switched pole and an M80 motor rating.

Q. Can the Clipsal 56SW110-RW be used as an isolator?
A.
No. Clipsal lists it as not suitable for isolation, so use it as a standard surface switch.

Q. Is the Clipsal 56SW110-RW weatherproof?
A.
Yes. It is rated IP66 against dust and powerful water jets when correctly installed.

Q. What cable size does the Clipsal 56SW110-RW take?
A.
The screw terminals take 1.5 to 6mm² cables.

All products must be installed by a licensed electrican. DIY electrical work is illegal and very dangerous.

Change of Mind
All products purchased from MJS Electrical Products & Supplies are backed by a thirty (30) day Peace of Mind Return Policy. All products returned must be in perfect unused condition, with all components, complete with original packaging. We will not allow returns on damaged or incomplete products. Proof of purchase is required. Should the product not be in original condition, please contact us before returning it as this may save you some unnecessary costs.

Damaged / Faulty Goods
If you find that the goods were damaged in transit or were faulty in some manner, please contact us within 24 hours of receiving the goods. We will organise for the return of the goods and arrange a credit towards your next purchase or send a replacement product. Customer will incur the cost of return postage and be credited the purchase price only. We recommend that you return your unwanted items using registered post or trackable courier. We can not be held responsible if returned items are lost in transit.

Warranties
Product warranties are governed by the respective manufacturers and / or suppliers warranty terms and conditions (available on request). We will not be liable to you or any third party for any loss suffered due to product failure. We will process product warranty claims through the respective manufacturers and/or suppliers. All warranties are void if the product is not installed by a licensed electrician.

Amp 10A
Colour Resistant White Electric
Type Switch
IP Rating IP66
Material Polycarbonate
Frequency 50Hz
Standard AS/NZS 3133
Poles 1P
Range Clipsal 56 Series
PRODUCT INFO
SKU CL56SW110-RW
Model # 56SW110-RW
Barcode # 9311554333362
Brand Clipsal
SHIPPING INFO
Shipping Weight 0.3940kg
Shipping Width 0.105m
Shipping Height 0.090m
Shipping Length 0.105m